LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> RX 350 AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Instrument Panel Safety Pad >> Reassembly

Instrument Panel Safety Pad: Reassembly

  1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY 
  2. INSTALL AUTOMATIC LIGHT CONTROL SENSOR 
  3. INSTALL INSTRUMENT PANEL NO.2 WIRE 
    1. Engage the 18 clamps.
    2. Install the 2 screws and the instrument panel No. 2 wire.
      Fig 1: Identifying Instrument Panel No. 2 Wire Clamps & Screws
      G05274406Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO. 2 RADIO ANTENNA CORD (w/ Navigation System)  (See INSTALLATION )
  5. INSTALL NO.2 RADIO ANTENNA CORD (w/o Navigation System)  (See INSTALLATION )
  6. INSTALL GLOVE BOX LIGHT ASSEMBLY 
    1. Engage the 2 claws and install the glove box light assembly.
      Fig 2: Identifying Glove Box Light Assembly Claws
      G05274405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  7. INSTALL INSTRUMENT PANEL BRACKET SUB-ASSEMBLY CENTER 
    1. Install the screw < C > and the instrument panel bracket sub-assembly center.
      Fig 3: Identifying Instrument Panel Bracket Sub-Assembly Center Screw
      G05274404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL DEFROSTER NOZZLE NO. 1 GARNISH 
    1. Engage the 2 clips and 4 claws then install the defroster nozzle No. 1 garnish.
      Fig 4: Identifying Defroster Nozzle No. 1 Garnish Clips & Claws
      G05274403Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSTALL NETWORK GATEWAY ECU 
    1. Install the screw < C > and the network gateway ECU.
  10. INSTALL SIDE DEFROSTER NO. 1 NOZZLE 
    1. Engage the 2 claws and install the side defroster No. 1 nozzle.
      Fig 5: Identifying Side Defroster No. 1 Nozzle Claws
      G05274402Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. INSTALL SIDE DEFROSTER NO.2 NOZZLE 

    HINT:

    Use the same procedures for the side defroster No. 2 nozzle and the side defroster No. 1 nozzle

  12. INSTALL SIDE DEFROSTER NO. 1 NOZZLE DUCT 
    1. Install the screw < C > and the side defroster No. 1 nozzle duct.
      Fig 6: Identifying Side Defroster No. 1 Nozzle Duct Screw
      G05274401Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. INSTALL SIDE DEFROSTER NO. 2 NOZZLE DUCT 

    HINT:

    Use the same procedures for the side defroster No. 2 nozzle duct and the side defroster No. 1 nozzle duct.

  14. INSTALL HEATER TO REGISTER CENTER SUB DUCT 
    1. Install the 2 screws < C > and the heater to register center sub duct.
      Fig 7: Identifying Heater To Register Center Sub Duct Screws
      G05274400Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. INSTALL HEATER TO REGISTER NO.1 DUCT 
    1. Install the 4 screws < C > and the heater to register No.1 duct.
      Fig 8: Identifying Heater To Register No. 1 Duct Screws
      G05274399Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. INSTALL HEATER TO REGISTER NO. 4 DUCT 

    HINT:

    Use the same procedures for the heater to register No. 4 duct and the heater to register No. 1 duct.

  17. INSTALL DEFROSTER NOZZLE ASSEMBLY 
    1. Install the 3 screws < C > and the defroster nozzle assembly.
      Fig 9: Identifying Defroster Nozzle Assembly Screws
      G05274398Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. INSTALL INSTRUMENT PANEL NO. 1 PIN 
    1. Install the screw < C > and the instrument panel No. 1 pin.
      Fig 10: Identifying Instrument Panel No. 1 Pin Screw
      G05274397Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. INSTALL SIDE DEFROSTER NO. 3 NOZZLE DUCT 
    1. Install the screw < C > and the side defroster No. 3 nozzle duct.
      Fig 11: Identifying Side Defroster No. 3 Nozzle Duct Screw
      G05274396Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. INSTALL SIDE DEFROSTER NO. 4 NOZZLE DUCT 

    HINT:

    Use the same procedures for the side defroster No. 4 nozzle duct and the side defroster No. 3 nozzle duct.

  21. INSTALL FRONT NO. 2 SPEAKER (for Driver Side)  (See INSTALLATION )
  22. INSTALL FRONT NO. 2 SPEAKER (for Front Passenger Side) 

    HINT:

    Use the same procedures for the driver side and passenger side.

  23. INSTALL FRONT NO. 2 SPEAKER (w/ Front Center Speaker)  (See INSTALLATION )
  24. INSTALL INSTRUMENT PANEL NO. 1 SPEAKER PANEL SUB-ASSEMBLY 
    1. Engage the 2 clips and install the instrument panel No. 1 speaker panel sub-assembly.
      Fig 12: Identifying Instrument Panel No. 1 Speaker Panel Sub-Assembly Clips
      G05274419Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  25. INSTALL INSTRUMENT PANEL NO. 2 SPEAKER PANEL SUB-ASSEMBLY 

    HINT:

    Use the same procedures for the instrument panel No. 2 speaker panel sub-assembly and the instrument panel No. 1 speaker panel sub-assembly.

  26. INSTALL SPEAKER HOLE NO. 1 COVER (w/Mark Levinson Speaker System) 
    1. Engage the 4 clips and install the speaker hole No. 1 cover.
      Fig 13: Identifying Speaker Hole No. 1 Cover Clips
      G05274394Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals