Installation

JF2A TRANSFER / 4WD / AWD: TRANSFER ASSEMBLY: INSTALLATION

1. INSTALL TRANSFER ASSEMBLY






(a) Install the transfer with the 8 bolts.
Torque: 40 Nm (408 kgf-cm, 30 ft-lbf)
NOTICE:
Take care not to damage the adaptor oil seal with the transfer input shaft spline.

2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY
(a) Install the automatic transmission with transfer assembly Installation.
3. ADD TRANSFER OIL Service and Repair

4. CHECK FOR TRANSFER OIL LEAK