Removal

JF2A TRANSFER / 4WD / AWD: CENTER DIFFERENTIAL LOCK SWITCH: REMOVAL

1. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH Removal

2. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH Removal

3. REMOVE INSTRUMENT SIDE PANEL LH Removal

4. REMOVE NO. 1 SWITCH HOLE BASE Removal

5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

6. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal

7. REMOVE CENTER DIFFERENTIAL LOCK SWITCH






(a) Detach the 2 claws and remove the switch.