Removal

REAR SUSPENSION: REAR COIL SPRING: REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE REAR WHEEL
2. DRAIN BRAKE FLUID Removal

3. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY Removal

4. DISCONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY Removal

5. DISCONNECT REAR AXLE BREATHER HOSE SUB-ASSEMBLY Removal

6. SUPPORT REAR AXLE HOUSING ASSEMBLY Removal

7. DISCONNECT REAR STABILIZER END BRACKET LH






(a) Remove the 2 bolts and disconnect the stabilizer end bracket.
8. DISCONNECT REAR STABILIZER END BRACKET RH
(a) Remove the 2 bolts and disconnect the stabilizer end bracket.
9. DISCONNECT REAR LATERAL CONTROL ROD ASSEMBLY Removal

10. DISCONNECT REAR FLEXIBLE HOSE Removal

11. DISCONNECT REAR SHOCK ABSORBER ASSEMBLY LH






(a) Remove the bolt on the lower side of the shock absorber.
(b) Disconnect the shock absorber from the axle housing.
12. DISCONNECT REAR SHOCK ABSORBER ASSEMBLY RH






(a) Remove the bolt on the lower side of the shock absorber.
(b) Disconnect the shock absorber from the axle housing.
13. REMOVE REAR COIL SPRING LH
(a) While lowering the axle housing, remove the coil spring.
14. REMOVE HOLLOW SPRING SUB-ASSEMBLY
(a) Remove the hollow spring from the frame.