Removal

SUSPENSION CONTROL: ABSORBER CONTROL SWITCH: REMOVAL

1. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH Removal

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

3. REMOVE PARKING BRAKE HOLE COVER Removal

4. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY Removal

5. REMOVE POSITION INDICATOR HOUSING ASSEMBLY Removal

6. REMOVE SWITCH WIRE Disassembly

7. REMOVE CONSOLE BOX POCKET Disassembly

8. REMOVE LOWER POSITION INDICATOR HOUSING Disassembly

9. REMOVE INTEGRATION CONTROL AND PANEL SUB-ASSEMBLY (ABSORBER CONTROL SWITCH)






(a) Disconnect the connector.
(b) Remove the 5 screws and then remove the integration control and panel from the position indicator housing.