Installation

REAR SUSPENSION: REAR STABILIZER BAR: INSTALLATION

1. INSTALL STABILIZER LINK SUB-ASSEMBLY LH






(a) Install the stabilizer link to the stabilizer bar with the bolt and nut.
Torque: 48 Nm (489 kgf-cm, 35 ft-lbf)






(b) Install the bracket with the 2 retainers, 2 cushions and nut.
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)
2. INSTALL STABILIZER LINK SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.

3. INSTALL REAR STABILIZER BAR SUB-ASSEMBLY
(a) Install the 2 rear stabilizer bushes to the rear stabilizer bar.
(b) Install the rear stabilizer bar.
4. INSTALL REAR STABILIZER BRACKET LH






(a) Install the stabilizer bar bracket with the 2 bolts.
Torque: 56 Nm (571 kgf-cm, 41 ft-lbf)
5. INSTALL REAR STABILIZER BRACKET RH
HINT:
Use the same procedures described for the LH side.

6. CONNECT REAR STABILIZER END BRACKET LH






(a) Connect the stabilizer end bracket with the 2 bolts.
Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)
7. CONNECT REAR STABILIZER END BRACKET RH
HINT:
Use the same procedures described for the LH side.

8. INSTALL REAR WHEEL
Torque: 131 Nm (1336 kgf-cm, 97 ft-lbf)