Installation

SUSPENSION CONTROL: ABSORBER CONTROL SWITCH: INSTALLATION





1. INSTALL INTEGRATION CONTROL AND PANEL SUB-ASSEMBLY (ABSORBER CONTROL SWITCH)
(a) Install the integration control and panel to the position indicator housing with the 5 screws.
(b) Connect the connector.
2. INSTALL LOWER POSITION INDICATOR HOUSING Reassembly

3. INSTALL CONSOLE BOX POCKET Reassembly

4. INSTALL SWITCH WIRE Reassembly

5. INSTALL POSITION INDICATOR HOUSING ASSEMBLY Removal

6. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY Installation

7. INSTALL PARKING BRAKE HOLE COVER Installation

8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH Installation