Timing Cover

TIMING CHAIN COVER





Temporarily install the timing chain cover with the 28 bolts and nut.





Tighten the 3 bolts in several steps in the sequence shown in the illustration.
Torque 47 Nm (479 kgf-cm, 35 ft-lbf)





Temporarily install the fluid coupling bracket with the 4 bolts.





Temporarily install the belt tensioner with the standard bolt and 6 mm hexagon wrench bolt.





Tighten the 8 bolts labeled 4 to 11 in several steps in the sequence shown in the illustration.
Torque 47 Nm (479 kgf-cm, 35 ft-lbf)

Tighten the 23 bolts and nut labeled 12 to 35 in several steps in the sequence shown in the illustration.





Torque 23 Nm (235 kgf-cm, 17 ft-lbf)