Installation

DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR: INSTALLATION

1. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH






(a) Attach the 2 clips to install the power back door sensor assembly LH.
(b) Using a T25 "TORX" wrench, install the 6 screws.






(c) Connect the connector.
2. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.

3. INSTALL BACK DOOR GARNISH Reassembly

4. INSTALL BACK DOOR SIDE GARNISH LH Reassembly

5. INSTALL BACK DOOR SIDE GARNISH RH Reassembly

6. INSTALL CENTER BACK DOOR GARNISH Reassembly

7. INSTALL LOWER BACK DOOR STOPPER CUSHION Reassembly