Removal

SEAT: POWER SEAT SWITCH (w/ Manual Folding-up Function): REMOVAL

HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH
2. REMOVE REAR SEAT CUSHION HINGE COVER LH Removal

3. REMOVE REAR NO. 2 SEAT HINGE COVER LH Removal

4. REMOVE REAR NO. 2 SEAT ASSEMBLY Removal

5. REMOVE REAR STEP COVER Removal

6. REMOVE REAR DOOR SCUFF PLATE LH Removal

7. REMOVE REAR FLOOR MAT SUPPORT PLATE Removal

8. REMOVE LUGGAGE COMPARTMENT NO. 1 TRIM HOOK Removal

9. REMOVE REAR SEAT COVER CAP Removal

10. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH Removal

11. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH Removal

12. REMOVE REAR NO. 2 SEAT COVER BEZEL Removal







13. REMOVE FOLD SEAT SWITCH ASSEMBLY
(a) Using a screwdriver, detach the 4 claws and remove the switch.