Installation

3UR-FE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION

3UR-FE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSTALLATION





1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Install the sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the sensor connector.
2. INSTALL CRANKSHAFT POSITION SENSOR PROTECTOR






(a) Install the sensor protector with the 2 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
3. INSTALL NO. 2 ENGINE UNDER COVER Installation