Reassembly

3UR-FE EMISSION CONTROL: AIR INJECTION DRIVER: REASSEMBLY

1. INSTALL AIR INJECTION CONTROL DRIVER (for Bank 1)






(a) Install the air injection control driver with the 2 screws.
Torque: 2.0 Nm (20 kgf-cm, 18 in-lbf)
2. INSTALL AIR INJECTION CONTROL DRIVER (for Bank 2)






(a) Install the air injection control driver with the 2 screws.
Torque: 2.0 Nm (20 kgf-cm, 18 in-lbf)






(b) Install the 2 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)