Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH: REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH Removal

2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

3. REMOVE COWL SIDE TRIM BOARD LH Removal

4. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal

5. REMOVE VSC OFF SWITCH
(a) Disconnect the VSC OFF switch connector.






(b) Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the lower instrument panel finish panel.
HINT:
Tape the screwdriver tip before use.