Installation

EXTERIOR PANELS / TRIM: REAR SPOILER: INSTALLATION

HINT:
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL REAR SPOILER SUB-ASSEMBLY





(a) Attach the 3 clips to install the rear spoiler.






(b) w/ Power Back Door:
Install the 4 bolts and 2 hole plugs.






(c) w/o Power Back Door:
Install the 4 bolts.
2. INSTALL BACK DOOR GLASS CHANNEL LH (w/o Power Back Door) Installation

3. INSTALL BACK DOOR GLASS CHANNEL RH (w/o Power Back Door) Installation

4. INSTALL CENTER BACK DOOR GARNISH Reassembly