Removal

DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH (for Back Door): REMOVAL

1. REMOVE INSTRUMENT SIDE PANEL LH Removal

2. REMOVE NO. 1 SWITCH HOLE BASE Removal

3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH Removal

5. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH Removal

6. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal

7. REMOVE INSTRUMENT PANEL BOX ASSEMBLY Removal

8. REMOVE COMBINATION SWITCH ASSEMBLY






(a) Detach the 4 claws and remove the switch.