Installation

SEAT: LUMBAR SWITCH: INSTALLATION

HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.





1. INSTALL LUMBAR SWITCH
(a) Install the switch with the 2 screws.
2. INSTALL FRONT SEAT CUSHION SHIELD LH Reassembly

3. INSTALL RECLINING POWER SEAT SWITCH KNOB Reassembly

4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB Reassembly

5. INSTALL FRONT SEAT ASSEMBLY LH
(a) Install the front seat assembly Installation.
6. INSTALL ENGINE ROOM SIDE COVER LH Installation