Installation

SEAT: REAR SEATBACK HEATER (for RH Side): INSTALLATION

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

1. INSTALL REAR SEATBACK HEATER ASSEMBLY
(a) Set the seatback heater with the name stamp side facing the seatback cover.
(b) Install the seatback heater with new tack pins.





2. INSTALL REAR SEPARATE TYPE SEATBACK COVER Reassembly

3. INSTALL SEATBACK COVER WITH PAD Reassembly

4. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY Reassembly

5. INSTALL REAR SEAT HEADREST ASSEMBLY
6. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY RH Reassembly

7. INSTALL REAR SEATBACK COVER Reassembly

8. INSTALL SEAT CUSHION COVER WITH PAD Reassembly

9. INSTALL REAR SEAT UNDER TRAY COVER RH Reassembly

10. INSTALL REAR UNDER SIDE COVER LH Reassembly

11. INSTALL REAR SEAT COVER Reassembly

12. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH Reassembly

13. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH Reassembly

14. INSTALL REAR NO. 2 SEAT PROTECTOR Reassembly

15. INSTALL REAR NO. 2 SEAT LEG SIDE COVER Reassembly

16. INSTALL UPPER SEAT TRACK RAIL COVER RH Reassembly

17. INSTALL UPPER SEAT TRACK RAIL COVER LH Reassembly

18. INSTALL REAR NO. 1 SEAT RECLINING COVER LH Reassembly

19. INSTALL REAR NO. 1 SEAT RECLINING COVER RH Reassembly

20. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH Reassembly

21. INSTALL SEAT ADJUSTER BOLT COVER Reassembly

22. INSTALL REAR NO. 1 SEAT ASSEMBLY RH
(a) Install the rear No. 1 seat assembly Installation.