Installation

SEAT: REAR SEAT CUSHION HEATER (for RH Side): INSTALLATION

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY
(a) Set the seat cushion heater with the name stamp side facing the seat cushion cover.
(b) Install the seat cushion heater with new tack pins.





2. INSTALL REAR SEPARATE TYPE SEAT CUSHION COVER Reassembly

3. INSTALL SEAT CUSHION COVER WITH PAD Reassembly

4. INSTALL REAR SEAT UNDER TRAY COVER RH Reassembly

5. INSTALL REAR UNDER SIDE COVER LH Reassembly

6. INSTALL REAR SEAT COVER Reassembly

7. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH Reassembly

8. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH Reassembly

9. INSTALL REAR NO. 2 SEAT PROTECTOR Reassembly

10. INSTALL REAR NO. 2 SEAT LEG SIDE COVER Reassembly

11. INSTALL UPPER SEAT TRACK RAIL COVER RH Reassembly

12. INSTALL UPPER SEAT TRACK RAIL COVER LH Reassembly

13. INSTALL REAR NO. 1 SEAT RECLINING COVER LH Reassembly

14. INSTALL REAR NO. 1 SEAT RECLINING COVER RH Reassembly

15. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH Reassembly

16. INSTALL SEAT ADJUSTER BOLT COVER Reassembly

17. INSTALL REAR NO. 1 SEAT ASSEMBLY RH
(a) Install the rear No. 1 seat assembly Installation.