Installation

SEAT: REAR SEAT CUSHION HEATER (for LH Side): INSTALLATION

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY
(a) Set the seat cushion heater with the name stamp side facing the seat cushion cover.
(b) Install the seat cushion heater with new tack pins.





2. INSTALL REAR SEPARATE TYPE SEAT CUSHION COVER Reassembly

3. INSTALL SEAT CUSHION COVER WITH PAD Reassembly

4. CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH Installation

5. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH Installation

6. INSTALL REAR SEAT UNDER TRAY COVER LH Reassembly

7. INSTALL REAR SEAT CUSHION COVER RH Reassembly

8. INSTALL REAR UNDER SIDE COVER LH Reassembly

9. INSTALL REAR SEATBACK STAY COVER LH Reassembly

10. INSTALL SEAT BELT ANCHOR COVER CAP Reassembly

11. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH Reassembly

12. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH Reassembly

13. INSTALL REAR NO. 2 SEAT PROTECTOR Reassembly

14. INSTALL REAR NO. 2 SEAT LEG SIDE COVER Reassembly

15. INSTALL UPPER SEAT TRACK RAIL COVER RH Reassembly

16. INSTALL UPPER SEAT TRACK RAIL COVER LH Reassembly

17. INSTALL REAR NO. 1 SEAT RECLINING COVER RH Reassembly

18. INSTALL REAR NO. 1 SEAT RECLINING COVER LH Reassembly

19. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH Reassembly

20. INSTALL SEAT ADJUSTER BOLT COVER Reassembly

21. INSTALL REAR NO. 1 SEAT ASSEMBLY
(a) Install the rear No. 1 seat assembly Installation.