Pillar Speaker (for Front Side)

AUDIO / VIDEO: PILLAR SPEAKER (for Front Side): INSPECTION

1. INSPECT FRONT NO. 3 SPEAKER ASSEMBLY
(a) When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.
OK:
Malfunction disappears.
HINT:
- Connect all the connectors to the front No. 3 speakers.
- When there is a possibility that either the right or left pillar speaker is defective, inspect by interchanging the right one with the left one.
- Perform the inspection above on both LH and RH sides.