Installation

AUDIO / VIDEO: MULTI-DISPLAY (w/o Navigation System): INSTALLATION

1. INSTALL NO. 2 RADIO RECEIVER BRACKET






(a) Install the bracket with the 3 bolts.
Torque: 3.0 Nm (30 kgf-cm, 26 in-lbf)
2. INSTALL NO. 1 RADIO RECEIVER BRACKET






(a) Install the bracket with the 3 bolts.
Torque: 3.0 Nm (30 kgf-cm, 26 in-lbf)
3. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET
(a) Connect the connectors.






(b) Insert the display to attach the 2 claws and 4 clips on its backside.
NOTICE:
When inserting the display, do not press the knobs on it.





(c) Install the display with the 2 screws and 2 bolts.
for bolts labeled A - Torque: 12 Nm (122 kgf-cm, 8 ft-lbf)
4. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. INSTALL ENGINE ROOM SIDE COVER LH Installation