DTC 9E-40

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: 9E-40: Device Error

DTC 9E-40 - Device Error

DESCRIPTION





INSPECTION PROCEDURE
HINT:
After the inspection is completed, clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
NOTICE:
If this code is output frequently, replace the display and navigation module display.

PROCEDURE

1. CLEAR DTC
(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
NEXT -- Continue to next step.
2. RECHECK DTC
(a) Recheck for DTCs and check if the same trouble code is output.
OK:
No DTC is output.
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY
OK -- USE SIMULATION METHOD TO CHECK