LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 600hL >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Cooling >> Thermostat >> Removal

Cooling System (Mechanical): Cooling: Thermostat: Removal

  1. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE NO. 1 AIR CLEANER INLET  (See REMOVAL )
  4. REMOVE ENGINE ROOM SIDE COVER RH  (See REMOVAL )
  5. REMOVE NO. 1 ENGINE UNDER COVER  (See REMOVAL )
  6. DRAIN ENGINE COOLANT  (See REPLACEMENT  )
  7. REMOVE RADIATOR RESERVOIR ASSEMBLY 
    1. Disconnect the 2 reservoir hoses
    2. Fig 1: Locating Radiator Reservoir Assembly Reservoir Hoses And Bolts
      G05773340Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 bolts and reservoir
  8. DISCONNECT NO. 2 RADIATOR HOSE 
    1. Disconnect the radiator hose
      Fig 2: Locating No. 2 Radiator Hose
      G05773341Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE WATER INLET SUB-ASSEMBLY WITH THERMOSTAT 
    1. Remove the 3 nuts, water inlet with thermostat and gasket.
      Fig 3: Locating Water Inlet Sub-Assembly With Thermostat Nuts
      G05773342Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002