Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs are not present | - |
| Engine speed | 1500 rpm or less |
| Either A or B condition is met: | - |
| A. Following conditions are met: | (a) and (b) |
| (a) Engine speed | 500 rpm or less |
| (b) Battery voltage | 6 V or more |
| B. Following conditions are met: | (a), (b) and (c) |
| (a) Engine speed | More than 500 rpm |
| (b) Battery voltage | 10 V or more |
| (c) Number of sparks after CPU is reset | 5 sparks or more |