Luggage Door Hinge Torsion Bar: Removal

REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH
1. Remove the 3 clips and door hinge cover.
  
  Fig 1: Identifying Luggage Compartment Door Hinge Cover LH Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH
1. Remove the 3 clips and door hinge cover.
  
  Fig 2: Identifying Luggage Compartment Door Hinge Cover RH Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

Fig 3: Identifying Luggage Compartment Mat Sub-Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ROPE HOOK ASSEMBLY
1. Remove the 4 bolts and 4 rope hooks.
  
  Fig 4: Locating Bolts And Rope Hooks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ROPE HOOK
1. Remove the 4 rope hooks by pushing the claws in the direction of the arrows in the illustration.
  
  Fig 5: Pushing Rope Hook Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DECK TRIM SIDE BOARD RH
1. Remove the clip.
2. Remove the side deck trim.
  
  Fig 6: Identifying Deck Trim Side Board RH Clip
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DECK TRIM SIDE BOARD LH
1. Remove the clip.
2. Remove the side deck trim.
  
  Fig 7: Identifying Deck Trim Side Board LH Clip
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
1. Remove the light assembly.
  
  Fig 8: Removing Light Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LUGGAGE COMPARTMENT NO. 2 TRIM HOOK (w/o Rear Cooler)
1. Detach the No. 2 trim hook.
REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) (See REMOVAL )
REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT
1. w/o Rear Cooler:
  1. Remove the 4 claws, 3 clips and trim.
    
    Fig 9: Identifying Luggage Compartment Trim Cover Front Claws And Clips (W/O Rear Cooler)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. w/ Rear Cooler:
  1. Remove the 4 claws, 5 clips and trim.
    
    Fig 10: Identifying Luggage Compartment Trim Cover Front Claws And Clips (W/ Rear Cooler)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR FLOOR FINISH PLATE
1. Remove the 3 clips and finish plate.
  
  Fig 11: Identifying Finish Plate Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
1. w/o Rear Cooler:
  1. Remove the 3 clips and trim.
    
    Fig 12: Identifying Luggage Compartment Trim Cover Assembly LH Clips (W/O Rear Cooler)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. w/Rear Cooler:
  1. Remove the 3 clips and trim.
    
    Fig 13: Identifying Luggage Compartment Trim Cover Assembly LH Clips (W/ Rear Cooler)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH
1. w/o Rear Cooler:
  1. Remove the 3 clips and trim.
    
    Fig 14: Identifying Luggage Compartment Trim Cover Assembly RH Clips (W/O Rear Cooler)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. w/ Rear Cooler:
  1. Remove the 3 clips and trim.
    
    Fig 15: Identifying Luggage Compartment Trim Cover Assembly RH Clips (W/ Rear Cooler)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LUGGAGE DOOR HINGE TORSION BAR RH
1. Detach the 3 clips and luggage door wire.
  
  Fig 16: Locating Luggage Door Wire Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the luggage door hinge torsion bar RH from the body LH side as shown in the illustration.
  
  Fig 17: Removing Luggage Door Hinge Torsion Bar RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and body RH side as shown in the illustration.
  SST 09804-24010
  
  Fig 18: Disconnecting Luggage Door Hinge Torsion Bar RH Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.
  
  Fig 19: Disconnecting Luggage Door Hinge Torsion Bar RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LUGGAGE DOOR HINGE TORSION BAR LH
1. Remove the luggage door hinge torsion bar LH from the body RH side as shown in the illustration.
  
  Fig 20: Removing Luggage Door Hinge Torsion Bar LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and body RH side as shown in the illustration.
  SST 09804-24010
  
  Fig 21: Disconnecting Luggage Door Hinge Torsion Bar LH Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.
  
  Fig 22: Disconnecting Luggage Door Hinge Torsion Bar LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LUGGAGE COMPARTMENT NO. 2 DOOR TORSION BAR SUPPORT
1. Remove the luggage compartment door torsion bar support.