LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 460 >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Front Passenger Side Knee Airbag Assembly >> Removal

Front Passenger Side Knee Airbag Assembly: Removal

  1. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH  (See REMOVAL )
  3. REMOVE INSTRUMENT SIDE PANEL RH  (See REMOVAL )
  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE LOWER INSTRUMENT PANEL 
    1. Using a screwdriver, detach the 1 clips and the 2 claws and remove the panel.
      Fig 1: Identifying Lower Instrument Panel Clip And Claws
      G04951206Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY 
    1. Remove the 3 bolts detach the claw and front passenger side knee airbag.
    2. Disconnect the connector.
      NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
      Fig 2: Locating Front Passenger Side Knee Airbag Bolts
      G04951204Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals