LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 460 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> INTEGRATION CONTROL AND PANEL (for Front Side) >> Installation

INTEGRATION CONTROL AND PANEL (for Front Side): Installation

  1. INSTALL NO. 1 RADIO BRACKET 
    1. Install the bracket with the 2 bolts.
      Fig 1: Locating No. 1 Radio Bracket Bolts
      G04950845Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 2 RADIO BRACKET 
    1. Install the bracket with the 2 bolts.
      Fig 2: Locating No. 2 Radio Bracket Bolts
      G04950844Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY WITH BRACKET 
    1. Connect the connectors.
    2. Insert the panel and attach the 6 clips on its backside.
      Fig 3: Installing Integration Control And Panel Assembly With Bracket
      G04950848Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the panel with the 2 bolts.
      Fig 4: Locating Panel With Bolts
      G05852112Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL RADIO RECEIVER ASSEMBLY  (See INSTALLATION )
  5. INSTALL CONSOLE PANEL SUB-ASSEMBLY UPPER  (See INSTALLATION )
  6. INSTALL REAR CONSOLE PANEL UPPER  (See INSTALLATION )
  7. INSTALL NO. 3 BOX PANEL  (See INSTALLATION )
  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  (See INSTALLATION )
  9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  (See INSTALLATION )
  10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  12. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
  13. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals