Wiper Switch: Installation
- INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
- Attach the claw and install the wiper switch.
- Connect the 2 connectors.
- INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera)
- Attach the 4 clips to install the steering column cover upper onto the instrument panel cluster finish panel.
- Attach the claw to install the upper steering column cover.
- Attach the 2 claws to install the lower steering column cover.NOTE: Do not damage the tilt and telescopic switch.
- Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera)
- Connect the connector.
- Attach the 4 clips to install the steering column cover upper onto the instrument panel cluster finish panel.
- Attach the claw to install the upper steering column cover.
- Attach the 2 claws to install the lower steering column cover.NOTE: Do not damage the tilt and telescopic switch.
- Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002