Clutch Release Cylinder: Removal

WARNING: This page is about a different variant/trim than selected.

SEPARATE CLUTCH ACCUMULATOR ASSEMBLY
1. Remove the 3 bolts and separate the clutch accumulator assembly.
  
  Fig 1: Locating Bolts For Clutch Accumulator Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DISCONNECT CLUTCH LINE
1. Using SST, disconnect the clutch line.
  SST 09023-00101
  
  HINT:
  
  Use a container to catch the fluid.
  
  Fig 2: Identifying SST For Clutch Line
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY
1. Remove the 2 bolts and clutch release cylinder.