LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (A760H Automatic Transaxle) >> Shift Solenoid Valve >> Installation

Shift Solenoid Valve: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY  (See INSTALLATION  )
  2. CONNECT TRANSMISSION WIRE  (See INSTALLATION  )
  3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY  (See INSTALLATION  )
  4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY  (See INSTALLATION  )
  5. INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY  (See INSTALLATION  )
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  7. ADD AUTOMATIC TRANSMISSION FLUID 

    (See ADJUSTMENT  )

  8. RESET MEMORY 

    (See INITIALIZATION  )

scientia non olet · About LEMON Manuals