LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (A760H Automatic Transaxle) >> Park / Neutral Position Switch >> Removal

Park / Neutral Position Switch: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    1. Disconnect the neutral start switch connector.
      Fig 1: Locating Neutral Start Switch Connector
      G05317582Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a screwdriver, unstake the lock washer.
    3. Remove the lock nut and lock washer.
      Fig 2: Unstaking Lock Washer
      G05294769Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the bolt and park/neutral position switch assembly.
      Fig 3: Locating Set Bolt
      G05294770Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals