LEMON Manuals
: Even more car manuals for everyone
Home
>>
Lexus
>>
2008
>>
IS 250 RWD, Automatic
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 1 (A760H Automatic Transaxle)
>>
Automatic Transmission System
>>
DTC U0100 Lost Communication with ECM / PCM "A1
>>
Typical Enabling Conditions
Typical Enabling Conditions
WARNING:
This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS CHART
Monitor runs whenever following DTCs not present
None
Battery Voltage
10.5 V or more
Engine Switch
ON
Starter
OFF