Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
[OFF malfunction]
Both of the following condition are met: OFF malfunctions (A) and (B)
OFF malfunction (A)
TYPICAL MALFUNCTION THRESHOLDS CHART
| Turbine speed/Output speed (NT/NO) | 0.93 or more, and 1.07 or less (This means actual gear is 4th) |
OFF malfunction (B)
TYPICAL MALFUNCTION THRESHOLDS CHART
| Turbine speed/Output speed (NT/NO) | 0.51 or more, and 0.65 or less (This means actual gear is 6th) |
[ON malfunction]
One of the following conditions is met: ON malfunction (A), (B) or (C)
ON malfunctions (A)
TYPICAL MALFUNCTION THRESHOLDS CHART
| Turbine speed/Output speed (NT/NO) | 1.28 or more, and 1.53 or less (This means actual gear is 3rd) |
ON malfunction (B)
TYPICAL MALFUNCTION THRESHOLDS CHART
| Turbine speed - Output speed x 4th gear ratio (NT - NOx 4th gear ratio) | 1,000 rpm or more |
ON malfunction (C)
TYPICAL MALFUNCTION THRESHOLDS CHART
| Turbine speed - Output speed x 5th gear ratio (NT - NOx 5th gear ratio) | 1,000 rpm or more |