DTC B2611: Telescopic Position Sensor or Telescopic Motor Circuit Malfunction: Description
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
The telescopic motor is operated by the power source voltage supplied from the multiplex tilt and telescopic ECU and slides the steering column forward and backward. The telescopic position sensor (hall IC) in the telescopic motor detects the sliding position in the forward and backward directions of the steering column and outputs a signal to the CPU based on that sliding amount.
HINT
Limit positions can be confirmed on the Techstream
DTC DETECTION ITEM AND TROUBLE AREA
| DTC No | Detection Item | Trouble Area |
|---|---|---|
| B2611 | Telescopic operation stops within the operation range while operating |
|