Multiplex Tilt And Telescopic Ecu: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE STEERING COLUMN ASSEMBLY
HINT

Refer to the instructions for Removal of the steering column assembly (See REMOVAL ).
REMOVE STEERING LOCK ACTUATOR ASSEMBLY (See DISASSEMBLY )
REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
1. Disconnect the connector from the multiplex tilt and telescopic ECU
  
  Fig 1: Locating Multiplex Tilt And Telescopic ECU Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws and multiplex tilt and telescopic ECU
  
  Fig 2: Identifying Multiplex Tilt And Telescopic ECU Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002