LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 ((Door / Hatch)) >> Fuel Lid Opener Motor Assembly >> Removal

Fuel Lid Opener Motor Assembly: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER 
  2. REMOVE DECK SIDE TRIM BOX LH 
  3. REMOVE DECK SIDE TRIM BOX RH 
  4. REMOVE ROPE HOOK ASSEMBLY  (See REMOVAL )
  5. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER  (See REMOVAL )
  6. REMOVE NO. 2 ROOM LIGHT ASSEMBLY  (See REMOVAL )
  7. REMOVE ROPE HOOK  (See REMOVAL )
  8. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK  (See REMOVAL )
  9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER  (See REMOVAL )
  10. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See REMOVAL )
  11. REMOVE SIDE LUGGAGE COMPARTMENT TRIM COVER  (See REMOVAL )
  12. REMOVE FUEL LID OPENER MOTOR ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the lock and nut as shown in the illustration.
    3. Remove the fuel lid opener motor assembly.
      Fig 1: Removing Fuel Lid Opener Motor Assembly
      G05321363Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals