LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Starting (2GR-FSE)) >> Smart Access System With Push-Button Start >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Read the DTC by following the prompts on the tester screen.

      HINT:

      Refer to Techstream operator's manual for further details.

  2. CLEAR DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Erase the DTC by following the directions on the tester screen.

    HINT:

    Refer to Techstream operator's manual for further details.