LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Starting (2GR-FSE)) >> Smart Access System With Push-Button Start >> DTC B2276 ACCR Signal Circuit Malfunction >> Description

DTC B2276 ACCR Signal Circuit Malfunction: Description

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is output when the ACCR output circuits inside the power source control ECU are open or short.

HINT:

When the power source control ECU is replaced with a new one and the negative (-) battery terminal is connected, the power source mode becomes the IG-ON mode. When the battery is removed and reinstalled, the power source mode that was selected when the battery was removed is restored.

DTC DETECTION CONDITION AND TROUBLE AREA

DTC No. DTC Detection Condition Trouble Area
B2276 ACCR output circuit inside power source control ECU or other related circuit is malfunctioning
  • Power source control ECU
  • ECM
  • Wire harness or connector