Wireless Door Lock Buzzer: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT WHEEL RH
REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
1. Remove the 3 screws and front wheel opening extension pad RH
  
  Fig 1: Identifying Front Wheel Opening Extension Pad RH Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT FENDER LINER RH
1. Using a screwdriver, turn each pin 90° and remove the 2 pins and 2 hold clips
  
  Fig 2: Removing Pin & Hold Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 5 clips, 9 screws and front fender liner RH
  
  Fig 3: Identifying Front Fender Liner RH Clips And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE WIRELESS DOOR LOCK BUZZER
1. Disconnect the connector
2. Remove the clamp and the wireless door lock buzzer
  
  Fig 4: Locating Wireless Door Lock Buzzer Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002