Door Control Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL
1. Using a molding remover, disengage the 4 claws and 2 clips, and remove the power window regulator switch assembly with front door armrest base panel
2. Disconnect the connector
  
  Fig 1: Identifying Power Window Regulator Switch Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DOOR CONTROL SWITCH ASSEMBLY
1. Disengage the 2 claws and remove the door control switch assembly
  
  Fig 2: Identifying Door Control Switch Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002