LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Fuel (2GR-FSE)) >> Fuel Sender Gauge Assembly >> Removal

Fuel Sender Gauge Assembly: Removal

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCHARGE FUEL SYSTEM PRESSURE 

    HINT: 

    (See PRECAUTION )

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  3. REMOVE REAR SEAT CUSHION ASSEMBLY  (See REMOVAL )
  4. REMOVE NO. 2 REAR FLOOR SERVICE HOLE COVER  (See REMOVAL )
  5. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY  (See REMOVAL )
  6. REMOVE FUEL SENDER GAUGE ASSEMBLY (for LH Side)  (See REMOVAL )
  7. REMOVE REAR FLOOR SERVICE HOLE COVER  (See REMOVAL )
  8. REMOVE FUEL SENDER GAUGE ASSEMBLY (for RH Side)  (See REMOVAL )
scientia non olet · About LEMON Manuals