Fuel Pump Resistor: Removal
WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE COOL AIR INTAKE DUCT SEAL
(See
REMOVAL
)
- REMOVE ENGINE ROOM SIDE COVER RH
(See
REMOVAL
)
- REMOVE FUEL PUMP RESISTOR
- Disconnect the connector and clamp from the fuel pump resistor.
- Remove the 3 bolts and fuel pump resistor, and disconnect the ground wires.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002