LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Fuel (2GR-FSE)) >> Fuel Pressure Pulsation Damper >> Removal

Fuel Pressure Pulsation Damper: Removal

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCHARGE FUEL SYSTEM PRESSURE 

    HINT:

    See FUEL SYSTEM .

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  3. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE FUEL PRESSURE PULSATION DAMPER 
    1. Using SST, remove the fuel pressure pulsation damper and 2 gaskets, and disconnect the fuel tube from the fuel pump.

    SST 09612-24014 (09617-24011) 

    Fig 1: Removing Fuel Pressure Pulsation Damper
    G05286981Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals