LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Emission Control (2GR-FSE)) >> Purge Valve >> Removal

Purge Valve: Removal

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE PURGE VSV 
    1. Disconnect the connector.
    2. Disconnect the 2 hoses.
    3. Remove the bolt and purge VSV from the intake air connector.
      Fig 1: Locating Purge VSV Bolt
      G05826705Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals