Purge Valve: Installation

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL PURGE VSV
1. Install the purge VSV with the bolt.
  Torque: 18 N*m (182 kgf*cm, 13 ft.*lbf)
2. Connect the 2 hoses.
3. Connect the connector.
  
  Fig 1: Locating Purge VSV Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )