PCV Valve: Installation

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VENTILATION VALVE
1. Install the ventilation valve.
  1. Apply adhesive to 2 or 3 threads.
    Adhesive:
    
    Part No. 08833-00070, THREE BOND 1324 or equivalent.
    
    Fig 1: Applying Adhesive To 2 Or 3 Threads Of Ventilation Valve
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install the ventilation valve.
    Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf)
CONNECT VENTILATION HOSE
1. Connect the ventilation hose to the ventilation valve.
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )

Fig 2: Locating Ventilation Hose
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002