Section 58 (Emission Control (2GR-FSE)): Canister: Removal

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE FLOOR UNDER COVER
1. Remove the 5 nuts, 4 clips and floor under cover.
  
  Fig 1: Locating Nuts, Clips And Floor Under Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CHARCOAL CANISTER ASSEMBLY
1. Disconnect the wire harness from the 2 clamps.
  
  Fig 2: Locating Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the 2 quick connectors, hose and connector.
  
  Fig 3: Locating Quick Connectors, Hose And Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 4 nuts, 2 spacers and charcoal canister assembly.
  
  Fig 4: Locating Nuts, Spacers And Charcoal Canister Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002