LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Automatic Transaxle) >> Shift Solenoid Valve >> Installation

Shift Solenoid Valve: Installation

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY  (See REASSEMBLY  )
  2. CONNECT TRANSMISSION WIRE  (See INSTALLATION  )
  3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY  (See INSTALLATION  )
  4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY  (See INSTALLATION  )
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  6. ADD AUTOMATIC TRANSMISSION FLUID 

    (See AUTOMATIC TRANSMISSION FLUID  )

  7. RESET MEMORY 

    (See INITIALIZATION  )

scientia non olet · About LEMON Manuals