Inner Rear View Mirror: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL INNER REAR VIEW MIRROR ASSEMBLY
1. Using "TORX" socket wrench (T20), install the inner rear view mirror with the screw
  Torque: 1.8 N*m (18 kgf*cm, 16 in.*lbf)
2. Connect the connector.
  
  Fig 1: Removing/Installing Inner Rear View Mirror
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER
1. Engage the 2 claws and install the inner rear view mirror stay holder cover as shown in the illustration
  
  Fig 2: Identifying Claws And Inner Rear View Mirror Stay Holder Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002