Rear Door Courtesy Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR DOOR COURTESY SWITCH ASSEMBLY
1. Connect the connector.
2. Using "TORX" socket wrench T-type T30, install the rear door courtesy switch assembly with the "TORX" bolt
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 1: Identifying TORX Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002